![]() Use the set command to start the TFTP download: - set Updateaction 8.Įxample: - cd SPTftpUpdate - set ServerIP123.456.78.910 - set FileNameX4450-418-3B17 - set Updateaction getting image. Use the set command to set the file name of the ELOM remote flash file.įor example, for the Sun Fire X4450: - set FilenameX4450-418-3B17 7. ![]() Use the set command to set the IP address of the TFTP server.įor example: - set ServerIP where is the IP address of the TFTP server. ![]() Log in to the CLI, and navigate to the TftpUpdate directory. Note - The CLI commands, syntax, and namespaces in this section might be different from the commands, syntax, and namespaces used for your server see the Embedded Lights Out Manager Administration Guide for your server for the appropriate commands, syntax, and namespaces. For CLI access options, see the Embedded Lights Out Manager Administration Guide for your server. Server File Name Sun Fire X4150 remoteflashelomtoilomX4150-026450 Sun Fire X4450 remoteflashelomtoilomX4450-4503B17 3.Īccess the CLI. How can I clear it and restart firmware upgrade Thank you in advance.Įnsure that the server is in standby power mode.Ĭopy the transitional ELOM remote flash file from the Tools and Drivers CD to your TFTP server. Sun Fire X4150 Tools And Cd Upgrade Thank You However the message Someone is upgrading firmware is still there under Maintenance Firmware Upgrade. ![]() It then showed Someone is upgrading firmware and took forever. I did it under GUI ELOM Manager Maintenance Firmware Upgrade. Log in to the CLI using an account that has administrator privileges. The ILOM combined firmware image file is located on the Tools and Drivers CD at: Server ILOM Image File Sun Fire X4150 remoteflashilom2.0x4150-2.0.2.6.r35128.pkg Sun Fire X4450 remoteflashilom2.0.0x4450-2.0.2.6.pkg 3.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |